1．Features: 

① Directly weldable on PCB with elegant design.

② Compact, highly precise, completely sealed, mechanically and environmentally durable, with strong dielectric strength for safety and reliability.

2．Ambient conditions:                    

① Ambient temperature: -55℃～+85℃;

② Relative humidity: ≤90% at 40℃;

③ Atmospheric pressure: 860～1060mbar(about 650～800mmHg).

3．Operating Frequency Range: 20Hz~1kHz

4．Insulation Thermal Class：Class F (155℃)              

5．Safety Features:

① Insulation resistance: >1000MΩ in normal condition;

② Insulation withstand voltages: 6000V 50Hz/1min;

③ Fire retardancy: In conformity with UL94-V0.

6．Outline Drawing, Installation Dimension and Coil Diagram:

① TA1014-xZ (space between output winding’s pins is narrow): see the Fig.1 below.

② TA1014-xK (space between output winding’s pins is wide): see the Fig.2 below.

7．Typical Application and Technical Parameters:

① The parameters are listed in Table 1 while the sampling voltage is obtained directly by using a resistor (as shown in Fig.3 below).

② The parameters are listed in Table 2 while the sampling voltage is obtained by using an IC (as shown in Fig.4 below). 

Table 1：

Table2：

8．Attention:

① Connect the primary winding of the current transformer in series with the measured current loop, and operate the secondary winding in near short-circuit mode.

② Do not allow the secondary winding of the current transformer to be open-circuited and do not install any fuse in the secondary circuit.