1．Features: 

① This product has a compact size, elegant outline, and a built-in primary coil that can be directly welded on PCB for easy use.

② It is completely sealed for high precision, strong mechanical and environmental endurance, strong dielectric strength, and safe and reliable performance.

2．Ambient Conditions:

① Ambient temperature: -55℃～+85℃;

② Relative humidity: ≤90% at 40℃;

③ Atmospheric pressure: 860～1060mbar(about 650～800mmHg);

3．Operating Frequency Range: 20Hz~1kHz

4．Insulation Thermal Class：Class F (155℃).

5．Safety features:

① Insulation resistance: >1000MΩ in normal condition;

② Insulation withstand voltages: 2000V 50Hz/1 min;

③ Fire retardancy: In conformity with UL94-Vo.

6．Outline Drawing, Installation Dimension and Coil Diagram( tolerance ± 0.5mm) 

7．Typical Application and Technical Parameters:

① The parameters are listed in Table 1 while the sampling voltage is obtained directly by using a resistor (as shown in Fig.1 below).

② The parameters are listed in Table 2 while the sampling voltage is obtained by using an IC (as shown in Fig.2 below)

Table 1：

Table 2：

 8．Attention:

① Connect the primary winding of the current transformer in series with the measured current loop, and operate the secondary winding in near short-circuit mode.

② Do not allow the secondary winding of the current transformer to be open-circuited and do not install any fuse in the secondary circuit.