1. Features:

① This product has an elegant outline and can be directly soldered onto a PCB.

② Reliable insulation between primary winding and secondary winding, winding and shielding;

③The primary side does not have a series resistance input, and the secondary side directly outputs voltage;

④Fully enclosed, good mechanical and environmental resistance, strong voltage isolation capability, safe and reliable.

2. Ambient Conditions:

① Ambient temperature: -55℃～+85℃;

② Relative humidity: ≤90% at 40℃;

③ Atmospheric pressure: 860～1060mbar(about 650～800mmHg).

3. Operating Frequency Range: 20Hz~1kHz

4. Insulation Thermal Class: Class B (130℃)

5. Safety Features:

① Dielectric resistance：>1000MΩ in normal condition;

② Insulation withstand voltages: 3KV 50Hz/1min in line-frequency;

③ Fire retardancy: In conformity with UL94-V0.

6. Model Naming Rules:

7. Outline Drawing, Installation Dimension:( Figure 2 and Figure 3 ) ( tolerance±0.5mm )

8. Technical Parameters:

 Note: Customized products are available if the specification listed above are not met.